MANUFACTURE PROCESS

1.jpgmill_engineered_.jpg

Production

It is produced from 2.5mm-3.6mm thick, rotary peeled softwood veneer layers of Radiate pine, glued together using a WBP glue to form a continuous 2.5 meter wide billet, with thicknesses ranging from 27 to 75mm and a maximum length of 11.9 meters. The billet is then hot pressed and cut to size to make beams, planks, posts or panels, or processed into a variety of other products.

Technical Standard

Standards:OSHA (Standards & Regulations 29-CFR) 1926 Subpart L, Appendix A,BS 2482 Specification for Timber Scaffold Boards,AS1577-1993 scaffold planks Appendix A and Appendix B

Core:

Pine core and face

Adhesive:

Phenolic adhesive for exterior use

Section Size:

38mm /42mmthickness and 225mm /230mm wide

Moisture Content:

Maximum 16% moisture

Lengths:

1.0 m to 6.0 m length range available

End Sealant:

Acrylic end sealant for additional moisture protection

Edge Branding:

Permanent edge branding available at customer request

Finish:

Non-sanded faces, rounded edges, and painted end


Standard Size

Thickness(mm)

Width(mm)

Length(m)

Weight(kg/m)

38

225

1.0-6.0

4.95

42

230

1.0-6.0

5.50

JIANGSU FORMAUS BUILDING MATERIALS CO.,LTD All rights reserved 2015