Formwork LVL beam

Formwork LVL Beam is a structural laminated veneer lumber (LVL) product specially made for use as concrete formwork beams-bearers, joists, walers, soldiers,supports and other applications. It has been manufactured in accordance with AS/NZS 4357 with properties determined in accordance with AS/NZS 4063.2 and therefore complies with the requirements for structural design in accordance with AS1720.1.Formwork Beam is manufactured using an ‘A’ Bond with less than 0.5mg/l Formaldehyde (equivalent to E0) emissions from the final product. It is strong, lightweight, straight and uniform which will reduce forming costs and improve the quality of concrete finish.

Formwork LVL beam range

2.jpg

Specification

Formwork Beam is structural LVL manufactured and structurally characterized to the requirement of AS/NZS 4357.

Species: Radiata Pine,Larch Veneer,Massion Pine etc.

Thickness:2.6~3.1mm

Joints: Scarf

Moisture content:8-15% at time of dispatch

Adhesive: Phenolic Type A bond

Density:600kg/m3 approximately

Finish:Arris’s removed. Painted orange.

Tolerances: Depth -0mm, +2mm,Thickness -0mm, +2mm,Length -0, +10mm,Spring<L/1000

Design Property

Characteristic Strength Properties

Bending

42MPa

Shearing

6.0MPa

Bearing 

12.0MPa 

MOE

10700MPa

Section Properties

Width x Depth 

(mm)

Mass 

(kg/m)

I

(x106mm4)

Rigidity(EI)

(x109Nmm2)

Z

(x103mm3)

Msafe

(kNm)

Vsafe

(kN)

95 x 65

3.8

4.2

48.2

84.8

2.50

16.5

130 x 65

5.2

11.5

123.4

177.5

4.68

22.5


567.jpg

333.jpg

JIANGSU FORMAUS BUILDING MATERIALS CO.,LTD All rights reserved 2015